Other Options:
2” X 8” Dome Pre-Cut Shell Kits (Garages etc)
Super-lok* Dome Hardware Connector Kits (Standard Hardware)
Ultra-lok* Dome Hardware Connector Kits (High Wind/Snow Loading)
Our dome shell kits are constructed using the Super-Wal system of Natural Spaces Domes, Inc. The standard wall thickness is 15 inches! This is for 12” of insulation + room for air flow about the insulation to ventilate the shell. A Construction Manual with detailed instructions for a Contractor/DIYer is included with all kits including the geodesic dome connector hardware kit.
The Super-Wal Dome Complete Pre-Cut Shell Kit:
- Super-Lok dome connection hardware - hubs, plated steel sleeves, plated bolts, nuts and pins. Sleeves are attached to struts.
-
Risers - standard heights for high profile are 28 1/2", for low profile 45". Five riser walls come pre-assembled. The other risers (if needed) come with pre-assembled corner riser struts and pre-cut intermediate studs and plates.) 3/4" plywood is used on all risers.
-
Struts - 12" to 21" thick Super-Wal double strut with metal sleeves attached to select structural grade Doug Fir/Larch 2”x8”. Inner 2x4 strut is attached to exterior 2x8 with three 3/4" thick 8" wide plywood gussets. 2x8 exterior struts are pre-notched for ventilation.
-
Exterior Triangles Panels - 3/4" plywood pre-cut triangles are 2-piece. Joint between 2 pieces is tongue and grooved.
- Venting System - Lower base vent drip edge is enameled aluminum. Top vent cupola has complete pentagonal frame pre-assembled with 3/4" plywood sheathing pre-cut. Includes aluminum drip edge, combination fascia/soffit vent and aluminum base flashing between top vent cupola and shingle edge.
- Construction Manual includes complete installation instructions drawings and DVD for assembling shell kit. Engineering certification of dome shell included.
-
Owner-Builder Tool Package
We want to make sure you have the right tools for building our dome system. As part of your geodesic dome shell kit, we provide: Two 22 oz. hammers, two hammer holders, plastic chalk box w/chalk, two 30' tape measures, framing square, knee pads, 48" level and box wrench.
-
Plus: Our premium fastener/nail package (see Price List page 12), Plastic Plan Cover, 2 T-Shirts.
All structural shell items are color-coded or labeled for ease of assembly instruction.
Top
The Super-Wal Dome Pre-cut Shell Framing Kit
The pre-cut dome shell framing kits include everything in the Complete Pre-Cut Shell Kit as mentioned above except the exterior plywood triangles.
Top
Hugh and Theresa Mayhew
5209 E. Oregon Road
Elk, WA 99009
509-292-9709
Hugh@domesnorthwest.com
| 
